H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 26)

7-4
z You need to press Ctrl+B within one second when the prompt “Press Ctrl+B to enter extended boot
menu” appears. Otherwise, the system will enter the application decompression process, instead
of the extended BootWare menu.
z After the system enters the application decompression process, if you want to enter the extended
BootWare menu, you need to reboot the AP.
z The extended boot menu is referred to as BootWare main menu in this manual unless otherwise
stated.
At the prompt above, press Ctrl+B. The system prompts you to enter the BootWare password:
Please input BootWare password:
After you provide the correct password, the system enters the BootWare main menu.
The initial BootWare password is null. If you fail to enter the correct BootWare password three times in
a row, the system will be halted and you need to restart the device manually.
BootWare main menu:
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
====================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Modify BootWare Password |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
==========================================================================
Enter your choice(0-9):
Table 7-1 BootWare main menu
Menu item Description
<1> Boot System Load the application from the Flash
<2> Enter Serial SubMenu
Enter the serial submenu. For more information, see Serial interface
submenu .
<3> Enter Ethernet SubMenu
Enter Ethernet submenu. For more information, see Ethernet interface
submenu .
<4> File Control File control submenu. For more information, see File control submenu .
<5> Modify BootWare Password Modify BootWare password
<6> Skip Current System
Configuration
Boot the system with the system configuration ignored.
This operation is valid this time, and you need to configure it next time.
This option is generally used when you lose the password.