H3C Technologies H3C WA2600 Series WLAN Access Points - Manual (Page 27)

7-5
Menu item Description
<7> BootWare Operation Menu
BootWare operation submenu. For more information, see BootWare
operation submenu .
<8> Clear Super Password
Clear the super password.
The super password is used in user level switching.
No super password is set by default.
This setting is valid for the first reboot of the AP only. The super
password will be restored after a second reboot.
<9> Storage Device Operation
Storage device operation submenu. For more information, see Storage
device operation submenu .
<0> Reboot Reboot the AP
BootWare Submenus
Serial interface submenu
You can upgrade the application program, change the serial interface baud rate and so on through this
submenu.
Select 2 from the BootWare main menu to enter the serial interface submenu.
1) Serial interface submenu of the WA2600 series indoor APs
========================================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
==============================================================
Enter your choice(0-5):
2) Serial interface submenu of the WA2200 series and WA2600 series enhanced APs
=======================================
|Note:the operating device is flash |
| <1> Download Application Program To SDRAM And Run |
| <2> Update Main Application File |
| <3> Modify Serial Interface Parameter |
| <0> Exit To Main Menu |
=============================================================
Enter your choice(0-3):
Ethernet interface submenu
Select 3 from the BootWare main menu to enter the Ethernet interface submenu.
1) Ethernet interface submenu of the WA2600 series indoor APs
=====================================
|Note:the operating device is flash |
| <1> Download Application Program To SDRAM And Run |
| <2> Update Main Application File |
| <3> Update Backup Application File |
| <4> Update Secure Application File |