H3C Technologies H3C SR6600 - Manual (Page 87)

77
Figure 81 Loosening the captive screws of the air filter
2. Gently pull the air filter out along the slide rails.
Figure 82 Pulling the air filter out along the slide rails
3. Install a new air filter. For more information, see " Installing an air filter ."
Replacing a memory module
The RPE-X1s and FIPs are equipped with memory modules. Before installing or removing a memory
module, remove the RPE-X1 or FIP from the chassis first. For more information, see " Replacing an MPU ,"
" Replacing an RSE-X1 MPU ," and " Replacing a FIP module ."