H3C Technologies H3C SR6600 - Manual (Page 128)

118
FIP-110 combo interface specifications
Table 48 FIP-110 copper Ethernet port specifications
Item Remarks
Connector RJ-45
Interface type Autosensing
Supported frame format
Ethernet_II
Ethernet_SNAP
Interface speed and
duplex mode
10 Mbps Half/full duplex, auto-negotiation
100 Mbps Half/full duplex, auto-negotiation
1000 Mbps Full duplex, auto-negotiation
Table 49 FIP-110 fiber Ethernet port specifications
Item Remarks
Connector LC
Transceiver module type SFP
Interface standards 802.3, 802.3u, and 802.3ab
Transmission
power
Type
Short-haul
multi-mode
(850 nm)
Mid-haul
single-mode
(1310 nm)
Long haul
(1310 nm) Long haul
(1550 nm)
Super long
haul (1550
nm)
Minimum –5 dBm –9 dBm –2 dBm –4 dBm –4 dBm
Maximum 0 dBm –3 dBm 5 dBm 1 dBm 2 dBm
Receive sensitivity –17 dBm -–20 dBm –23 dBm –21 dBm –22 dBm
Duplex mode 1000 Mbps, full duplex
Table 50 Transceiver modules for the FIP-110 fiber ports
Model
Central
wavelength Connector Optical fiber
Transmission
rate
Max. transmission
distance
SFP-GE-SX-MM85
0-A
850 nm LC
62.5/125 μm
multi-mode
optical fiber
1250 Mbps
0.55 km (0.34
miles)
SFP-GE-LX-SM131
0-A
1310 nm LC
9/125 μm
single-mode
optical fiber 1250 Mbps
10 km
(6.21 miles)
SFP-GE-LH40-SM1
310
1310 nm LC
9/125 μm
single-mode
optical fiber
1250 Mbps
40 km
(24.86 miles)
SFP-GE-LH40-SM1
550
1550 nm LC
9/125 μm
single-mode
optical fiber
1250 Mbps
40 km
(24.86 miles)