Sap-48gbp – H3C Technologies H3C SR6600 User Manual
Page 135

125
•
100 Mbps SFP fiber transceiver modules
•
1000 Mbps SFP fiber transceiver modules
•
100/1000 Mbps SFP fiber transceiver modules
•
10/100/1000 Mbps SFP copper transceiver modules supporting fiber-to-copper conversion (The
SAP-24GBP supports 10/100/1000 Mbps auto-sensing if used together with this transceiver
module.)
The transceiver modules are optional to be separately ordered if needed.
Use transceiver modules provided by H3C only. The router might be incompatible with other transceiver
modules and thus displays alarms automatically.
When working with SFP transceiver modules, the SAP-24GBP must use an optical fiber with LC-type
connectors.
SAP-48GBP
The SAP-48GBP has 48 high-performance fiber SFP ports that can be both routed and switched. One
two-color LED is available for each port to indicate their activity and link status. The module also has a
RUN LED to indicate the module operating status.
Figure 117 SAP-48GBP front panel
(1) SFP ports 0 to 47
(2) SAP module status LED (RUN)
(3) LEDs for SFP ports 0 to 47
(4) Ejector levers
(5) Captive screw
Table 57 SAP-48GBP specifications
Item Specification
Flash 4
MB
Memory type and size
•
Default—Two 1-GB DDR2 SDRAMs
•
Maximum—Two 2-GB DDR2 SDRAMs
NVRAM 128
KB
Max power consumption 144 W
Connector type
SFP
Number of interfaces
48
Interface standards
802.3, 802.3u, and 802.3ab
Supported frame format
Ethernet_II
Ethernet_SNAP