Displaying detailed information about a module – H3C Technologies H3C SR6600 User Manual
Page 67
57
[FIXED PORT] GE5/0/1 (Hardware)Ver.A, (Driver)1.0, (Cpld)132.0
[SUBSLOT 1] The SubCard is not present
[SUBSLOT 2] The SubCard is not present
Displaying the operational statistics of the router
When you perform routine maintenance or the system fails, you might need to view the operational
information of each functional module for locating failures. Generally, you need to run display
commands one by one. To collect more information one time, you can execute the display
diagnostic-information command in any view to display or save the operational statistics of multiple
functional modules of the router. This command displays the output of the display clock, display version,
display device, and display current-configuration commands.
•
To save the operational statistics of each functional module of the router, type y when the system
prompts you to save or display the diagnostic information.
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[cfa0:/default.diag]:aa.diag
Diagnostic information is outputting to cfa0:/aa.diag.
Please wait...
Save succeeded.
Execute the more aa.diag command in user view, and then press the Page Up and Page Down
keys to view the contents of the file aa.diag.
•
To display the operational statistics of each functional module of the router, type n when the system
prompts you to save or display the diagnostic information. The output is too much and omitted here.
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================
===============display clock===============
=================================================
08:54:16 UTC Fri 11/12/2010
===================================================
===============display version===============
===================================================
…Omitted…
Displaying detailed information about a module
Use the display device verbose command to display detailed information about modules in each slot.
System-mode(Current/After Reboot): Normal/Normal
Slot No. Board type Status Primary SubSlots
---------------------------------------------------------------------
0 RPE-X1 Normal Master 0
1 N/A Absent N/A N/A
2 N/A Absent N/A N/A
3 N/A Absent N/A N/A
4 N/A Absent N/A N/A