H3C Technologies H3C SR6600 - Manual (Page 123)

113
Item Specification
Transmission
power
Type
Short-haul
(850 nm) Mid-haul
(1310 nm) Long haul
(1310 nm) Long haul
(1550 nm)
Super long
haul (1550
nm)
Minimum –9.5 dBm –9 dBm –2 dBm –4 dBm –4 dBm
Maximum 0 dBm –3 dBm 5 dBm 1 dBm 2 dBm
Receive sensitivity –17 dBm –20 dBm –23 dBm –21 dBm –22 dBm
Central wavelength 850 nm 1310 nm 1310 nm 1550 nm 1550 nm
Fiber type
62.5/125
μm
multi-mode
9/125 μm
single-mode 9/125 μm
single-mode 9/125 μm
single-mode 9/125 μm
single-mode
Max. transmission distance
0.55 km
(0.34 miles) 10 km (6.21
miles) 40 km
(24.86 miles) 40 km
(24.86 miles) 70 km
(43.50 miles)
Operating mode 1000 Mbps, full duplex
10 Gbps Ethernet port
The MCP-X2 provides two 10 Gbps Ethernet ports. 10 Gbps SFP+ ports do not support 1000 Mbps
transceiver modules.
Table 38 10 Gbps Ethernet port specifications
Item Specification
Protocol 802.3ae
Connector type LC
Transceiver module type SFP+
Physical layer 10GBASE-R/W
Transmission rate
• LAN PHY—10.3125 Gbps
• WAN PHY—9.95328 Gbps
Table 39 10 Gbps SFP+ transceiver module specifications
Model
Central
wavelength
Connector
type
Fiber type
Max. transmission
distance
SFP-XG-SX-MM850-A 850 nm LC 50/125μm multi-mode 300 m (984.25 ft)
SFP-XG-LX-SM1310 1310 nm LC 9/125μm single-mode 10 km (6.21 miles)
SFP-XG-LH40-SM1550 1550 nm LC 9/125μm single-mode 40 km (24.86 miles)
RESET button
CAUTION:
•
If you perform no save operation before resetting the router, the current system configuration will be lost.
• Never press the RESET button when the RUN LED is flashing fast or when the router is accessing the CF
card or a USB storage device. Otherwise, the file system of the router might be damaged.