H3C Technologies H3C SR6600 - Manual (Page 68)

58
5 FIP-210 Startup N/A 2
Use the display device slot slot-number command to display detailed information about the module in the
specified slot.
display device slot 0
System-mode(Current/After Reboot): Normal/Normal
Slot 0 : RPE-X1
SubSlot No. Card Type Status Max Ports
--------------------------------------------------------
0 Fixed SubCard Normal 3
Table 11 Output description
Field Description
Slot No. Slot number of the module
Card Type Module model. The value NONE indicates that no module is present in the slot.
Status
Running status of the module:
• Absent—No module is present in the slot.
• Fault—The module in the slot is booting, or the module fails and cannot boot correctly.
• Normal—The module in the slot is a service module and is operating correctly.
Max Ports Maximum number of submodules that that module supports.
Displaying the electrical label information of a module
Use the display device manuinfo command to display the electrical label information of the module in
each slot.
Electrical label information is also called permanent configuration data or archive information, which
includes the module name, serial number, MAC address, and vendor name.
display device manuinfo
Slot 0:
DEVICE_NAME:NONE
DEVICE_SERIAL_NUMBER:NONE
MAC_ADDRESS:NONE
MANUFACTURING_DATE:NONE
VENDOR_NAME:H3C
Slot 5:
DEVICE_NAME:NONE
DEVICE_SERIAL_NUMBER:NONE
MAC_ADDRESS:NONE
MANUFACTURING_DATE:NONE
VENDOR_NAME:H3C
Use the display device manuinfo slot slot-number command to display the electrical label information of
the module in the specified slot.
display device manuinfo slot 5
Slot 5:
DEVICE_NAME:NONE