H3C Technologies H3C SR6600 - Manual (Page 136)

126
Item Specification
Optical
transmit
power
Type
Short haul
(850 nm)
fiber
transceiver
module
Medium haul
(1310 nm)
fiber
transceiver
module
Long haul
(1310 nm)
fiber
transceiver
module
Long haul
(1550 nm)
fiber
transceiver
module
Ultra-long
haul (1550
nm) fiber
transceiver
module
Min –9.5 dBm –9 dBm –2 dBm –4 dBm –4 dBm
Max 0 dBm –3 dBm 5 dBm 1 dBm 2 dBm
Receiving sensitivity –17 dBm –20 dBm –23 dBm –21 dBm –22 dBm
Central wavelength 850 nm 1310 nm 1310 nm 1550 nm 1550 nm
Fiber type
62.5/125
μm
multi-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
fiber
Max transmission
distance
0.55 km
(0.3418
miles)
10 km (6.21
miles) 40 km (24.86
miles) 40 km (24.86
miles) 70 km (43.50
miles)
Interface speed
1000 Mbps (recommended)
Full duplex
The SAP-48GBP supports the following types of transceiver modules:
• 100 Mbps SFP fiber transceiver modules
• 1000 Mbps SFP fiber transceiver modules
• 100/1000 Mbps SFP fiber transceiver modules
• 10/100/1000 Mbps SFP copper transceiver modules supporting fiber-to-copper conversion (The
SAP-48GBP supports 10/100/1000 Mbps auto-sensing if used together with this transceiver
module.)
The transceiver modules are optional to be separately ordered if needed.
Use transceiver modules provided by H3C only. The router might be incompatible with other transceiver
modules.
When working with SFP transceiver modules, the SAP-48GBP must use an optical fiber with LC-type
connectors.
OAP cards
You can install an OAP card in a service module slot to provide value-added services such as security
and voice. An OAP card is OAA-enabled and has an independent operating system. You can follow the
OAA standard to customize your own OAP cards. For more information about the OAP cards, see H3C
SR6600 Routers Interface Module Guide.