H3C Technologies H3C SR6600 - Manual (Page 153)

143
LED Status Description
Fast flashing (8
Hz)
Application program is being loaded (in this case,
never power off the device or hot-swap the
SAP-24GBP; otherwise, the SAP-24GBP might be
damaged), or the SAP-24GBP is not operating.
(yellow/green)
Status LEDs of
SFP 0 to SFP
23
Off No link is present.
Solid green A 1000 Mbps link is present.
Flashing green
Data is being received or transmitted at a rate of 1000
Mbps.
Solid yellow A 100 Mbps link is present.
Flashing yellow
Data is being received or transmitted at a rate of 100
Mbps.
Figure 129 SAP LEDs(SAP-48GBP)
Table 73 SAP-48GBP LED description
LED Status Description
(yellow/green)
Status LEDs of
SFP 0 to SFP
47
Off No link is present.
Steady green A 1000 Mbps link is present.
Flashing green Data is being received or transmitted at 1000 Mbps.
Steady yellow A 100 Mbps link is present.
Flashing yellow Data is being received or transmitted at 100 Mbps.
(green)
System status
LED
Off
No power input is available or the SAP-48GBP has
failed.
Slow flashing (1
Hz)
The SAP-48GBP is operating correctly.
Fast flashing (8
Hz)
Application program is being loaded (in this case,
never power off the device or hot-swap the
SAP-48GBP; otherwise, the SAP-48GBP might be
damaged), or the SAP-48GBP is not working.
HIM/MIM LEDs
For description of HIM/MIM LEDs, see the H3C SR6600/SR6600-X Routers Interface Module Guide.
1
2