H3C Technologies H3C SR6600 - Manual (Page 20)

10
IMPORTANT:
If there are multiple devices, mount the heavier equipment at a lower position.
Installing the router in a 19-inch rack
This section uses an SR6604 as an example.
Installing cage nuts to the rack
1. Determine where to install the router in the rack, and then install a rack shelf to the rack.
2. As shown in Figure 4 , mark the positions of cage nuts on the front rack posts by using a front
mounting bracket.
Figure 4 Marking the positions of the cage nuts
3. As shown in Figure 5 , install the cage nuts to the marked positions on the rack posts.