Packet formats, Verifying the configuration – H3C Technologies H3C S12500-X Series Switches User Manual
Page 91
79
# Enable 802.1X on port Ten-GigabitEthernet 1/0/1.
[Device] interface ten-gigabitethernet 1/0/1
[Device-Ten-GigabitEthernet1/0/1] dot1x
[Device-Ten-GigabitEthernet1/0/1] quit
# Enable MAC-based access control on the port. (Optional. MAC-based access control is the
default setting.)
[Device] interface ten-gigabitethernet 1/0/1
[Device-Ten-GigabitEthernet1/0/1] dot1x port-method macbased
# Specify aabbcc.net as the mandatory domain.
[Device-Ten-GigabitEthernet1/0/1] dot1x mandatory-domain aabbcc.net
198B
Verifying the configuration
Use the display dot1x interface ten-gigabitethernet 1/0/1 command to verify the 802.1X configuration.
After an 802.1X user passes authentication, you can use the display dot1x sessions command to view the
user connection information.
- H3C S5560 Series Switches H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C S9800 Series Switches H3C S5130 Series Switches H3C S5120 Series Switches