H3C Technologies H3C S12500-X Series Switches - Manual (Page 28)

16
No. Sub-attribute Description
20 Command
Operation for the session, used for session control. Possible values
include:
• 1—Trigger-Request.
• 2—Terminate-Request.
• 3—SetPolicy.
• 4—Result.
• 5—PortalClear.
24 Control_Identifier
Identification for retransmitted packets. For retransmitted packets from
the same session, this attribute must be the same value. For retransmitted
packets from different sessions, this attribute does not have to be the
same value. The client response of a retransmitted packet must also
include this attribute and the value of this attribute must be the same.
For Accounting-Request packets of the start, stop, and interim update
types, the Control_Identifier attribute does not take effect.
25 Result_Code
Result of the Trigger-Request or SetPolicy operation, zero for success and
any other value for failure.
26 Connect_ID Index of the user connection.
28 Ftp_Directory
FTP user working directory. When the RADIUS client acts as the FTP
server, this attribute is used to set the FTP directory for an FTP user on the
RADIUS client.
29 Exec_Privilege EXEC user priority.
59 NAS_Startup_Timestamp
Startup time of the NAS in seconds, which is represented by the time
elapsed after 00:00:00 on Jan. 1, 1970 (UTC).
60 Ip_Host_Addr
User IP address and MAC address included in authentication and
accounting requests, in the format A.B.C.D hh:hh:hh:hh:hh:hh. A space
is required between the IP address and the MAC address.
61 User_Notify Information that must be sent from the server to the client transparently.
62 User_HeartBeat
Hash value assigned after an 802.1X user passes authentication, which
is a 32-byte string. This attribute is stored in the user list on the NAS and
verifies the handshake packets from the 802.1X user. This attribute only
exists in Access-Accept and Accounting-Request packets.
140 User_Group
User groups assigned after the SSL VPN user passes authentication. A
user can belong to multiple user groups that are separated by
semi-colons. This attribute is used to work with the SSL VPN device.
141 Security_Level
Security level assigned after the SSL VPN user passes security
authentication.
201 Input-Interval-Octets Number of bytes input within a real-time accounting interval.
202 Output-Interval-Octets Number of bytes output within a real-time accounting interval.
203 Input-Interval-Packets
Number of packets input within an accounting interval in the unit set on
the NAS.
204 Output-Interval-Packets
Number of packets output within an accounting interval in the unit set on
the NAS.
205 Input-Interval-Gigawords Amount of bytes input within an accounting interval, in units of 4G bytes.