Configuring accounting methods for an isp domain – H3C Technologies H3C S12500-X Series Switches User Manual
Page 56
44
•
To configure RADIUS authorization, also configure RADIUS authentication, and reference the same
RADIUS scheme for RADIUS authentication and authorization. If the RADIUS authorization
configuration is invalid or RADIUS authorization fails, the RADIUS authentication also fails.
396B
Configuration procedure
To configure authorization methods for an ISP domain:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter ISP domain view.
domain isp-name
N/A
3.
Specify the default
authorization method for
all types of users.
authorization default { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
By default, the authorization
method is local.
The none keyword is not
supported in FIPS mode.
4.
Specify the command
authorization method.
authorization command { hwtacacs-scheme
hwtacacs-scheme-name [ local [ none ] |
local [ none ] | none }
By default, the default
authorization method is used
for command authorization.
The none keyword is not
supported in FIPS mode.
5.
Specify the authorization
method for LAN users.
authorization lan-access { local [ none ] |
none | radius-scheme radius-scheme-name
[ local ] [ none ] }
By default, the default
authorization method is used
for LAN users.
The none keyword is not
supported in FIPS mode.
6.
Specify the authorization
method for login users.
authorization login { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
By default, the default
authorization method is used
for login users.
The none keyword is not
supported in FIPS mode.
171B
Configuring accounting methods for an ISP domain
397B
Configuration prerequisites
Before configuring accounting methods, complete the following tasks:
1.
Determine the access type or service type to be configured. With AAA, you can configure an
accounting method for each access type and service type.
2.
Determine whether to configure the default accounting method for all access types or service types.
The default accounting method applies to all access users, but it has a lower priority than the
accounting method that is specified for an access type or service type.
398B
Configuration guidelines
When configuring accounting methods, follow these guidelines:
•
Login users who use FTP services do not support accounting.
- H3C S5560 Series Switches H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C S9800 Series Switches H3C S5130 Series Switches H3C S5120 Series Switches