Setting global password control parameters – H3C Technologies H3C S12500-X Series Switches User Manual

Page 162

150

[SwitchB-ipsec-policy-isakmp-use1-10] quit

# Specify the card in slot 1 to process the traffic for VLAN-interface 1.

[SwitchB] interface vlan-interface 1

[SwitchB-Vlan-interface1] service slot 1

# Apply the IPsec policy use1 to VLAN-interface 1.

[SwitchB-Vlan-interface1] ipsec apply policy use1

476B

Verifying the configuration

After the previous configurations, IKE negotiation is triggered to set up IPsec SAs when there are

end-to-end packets between Switch A and Switch B. After IPsec SAs are successfully negotiated by IKE,
the traffic between the two switches is IPsec protected.

This manual is related to the following products:

H3C S5560 Series Switches H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C S9800 Series Switches H3C S5130 Series Switches H3C S5120 Series Switches