H3C Technologies H3C S12500-X Series Switches - Manual (Page 44)

32
Tasks at a glance
(Required.)
721H
Specifying the HWTACACS authentication servers
(Optional.)
722H
Specifying the HWTACACS authorization servers
(Optional.)
723H
Specifying the HWTACACS accounting servers
(Required.)
724H
Specifying the shared keys for secure HWTACACS communication
(Optional.)
725H
Specifying a VPN for the scheme
(Optional.)
726H
Setting the username format and traffic statistics units
(Optional.)
727H
Specifying the source IP address for outgoing HWTACACS packets
(Optional.)
728H
Setting HWTACACS timers
(Optional.)
729H
Displaying and maintaining HWTACACS
371B
Creating an HWTACACS scheme
Create an HWTACACS scheme before performing any other HWTACACS configurations. You can
configure up to 16 HWTACACS schemes. An HWTACACS scheme can be referenced by multiple ISP
domains.
To create an HWTACACS scheme:
Step Command Remarks
1. Enter system view. system-view N/A
2. Create an HWTACACS
scheme and enter its view.
hwtacacs scheme
hwtacacs-scheme-name By default, no HWTACACS
scheme is defined.
372B
Specifying the HWTACACS authentication servers
You can specify one primary authentication server and up to 16 secondary authentication servers for an
HWTACACS scheme. When the primary server is not available, the device tries to communicate with the
secondary servers in the order they are configured, and communicates with the first secondary server in
active state. If redundancy is not required, specify only the primary server. An HWTACACS server can
function as the primary authentication server in one scheme and as the secondary authentication server
in another scheme at the same time.
To specify HWTACACS authentication servers for an HWTACACS scheme:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter HWTACACS
scheme view.
hwtacacs scheme hwtacacs-scheme-name N/A