Displaying and maintaining mac authentication, Setting local user password control parameters – H3C Technologies H3C S12500-X Series Switches User Manual
Page 125

113
Step Command
Remarks
7.
Specify the maximum number
of login attempts and the
action to be taken when a
user in the user group fails to
log in after the specified
number of attempts.
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
By default, the login-attempt policy
of the user group equals the global
login-attempt policy.
81B
Setting local user password control parameters
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a device management
user and enter local user view. local-user user-name class manage
By default, no local user exists.
Local user password control
applies to device management
users instead of network access
users.
For information about how to
configure a local user, see
"
823H
Configuring AAA
."
3.
Configure the password
expiration time for the local
user.
password-control aging aging-time
By default, the setting equals that
for the user group to which the
local user belongs. If no expiration
time is configured for the user
group, the global setting applies to
the local user.
4.
Configure the minimum
password length for the local
user.
password-control length length
By default, the setting equals that
for the user group to which the
local user belongs. If no minimum
password length is configured for
the user group, the global setting
applies to the local user.
5.
Configure the password
composition policy for the
local user.
password-control composition
type-number type-number
[ type-length type-length ]
By default, the settings equal those
for the user group to which the
local user belongs. If no password
composition policy is configured
for the user group, the global
settings apply to the local user.
6.
Configure the password
complexity checking policy
for the local user.
password-control complexity
{ same-character | user-name }
check
By default, the settings equal those
for the user group to which the
local user belongs. If no password
complexity checking policy is
configured for the user group, the
global settings apply to the local
user.
- H3C S5560 Series Switches H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C S9800 Series Switches H3C S5130 Series Switches H3C S5120 Series Switches