H3C Technologies H3C S12500-X Series Switches - Manual (Page 216)

204
# Create a local device management user named client001 with the plaintext password aabbcc
and service type ssh.
[SwitchB] local-user client001 class manage
[SwitchB-luser-manage-client001] password simple aabbcc
[SwitchB-luser-manage-client001] service-type ssh
[SwitchB-luser-manage-client001] quit
# Create an SSH user client001 with service type scp and authentication method password.
(Optional. If an SSH user is not created, password authentication is used by default.)
[SwitchB] ssh user client001 service-type scp authentication-type password
2. Configure an IP address for VLAN-interface 2 on the SCP client.
system-view
[SwitchA] interface vlan-interface 2
[SwitchA-Vlan-interface2] ip address 192.168.0.2 255.255.255.0
[SwitchA-Vlan-interface2] quit
[SwitchA] quit
3. Connect to the SCP server, download the file remote.bin from the server, and save it locally with
the name local.bin.
scp 192.168.0.1 get remote.bin local.bin
Username: client001
Connected to 192.168.0.1 ...
The Server is not authenticated. Continue? [Y/N]:y
Do you want to save the server public key? [Y/N]:n
Enter password:
18471 bytes transfered in 0.001 seconds.