Teac MX-2424 v1.15 - Manual (Page 96)

ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual 96
Update MX software
This menu updates the MX-OS on a Smart Card in an MX 2424 (the OS must be downloaded from
Tascam’s website first). The dialog will ask where the file is on the computer’s hard drive that you wish
to update. When downloaded, the file will be a self-extracting archive. The archive must be expanded
and the resulting file used to update the card.
Multi-Machine
When the Multi-machine mode is on, operations and commands issued for one machine are automatically
propagated to all other machines, which are part of the Multi-machine group. Multi-machine mode is
especially intended for use when conforming edits across multiple machines.
Although transport commands are also communicated in this mode, they are sent in sequence as an active
connection is established for each machine and the transports will therefore not be synchronized. To
accurately synchronize multiple machines, use the TL-Bus and control the group from the TL Bus Master
machine.
Starting Multi-machine Mode
To start the Multi-machine mode, select the machines which will be part of the multi-machine group by
selecting them in the Network Screen. Use Shift to select a range of machines and Ctrl+Click to select
discontiguous machines from the list. If all machines belonging to a sync group or a machine set are to be
used, these do not need to be selected in the Network Screen. After all desired machines are selected,
choose Start multi-machine from the Machine menu to open the Multi-machine mode window.