Teac MX-2424 v1.15 - Manual (Page 59)

ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual 59
Go to Tail
The Go to Tail button will move the playhead immediately to the end of the project. The precise time
location of the project end is always indicated in the lower right corner of the project overview area.
Go to Next Edit
The Go to Next Edit button will move the playhead immediately to the splice point at the beginning of
the next edit event of the tracks which are selected for editing. If no tracks are selected for editing, this
command will move the playhead to the splice point at the beginning of the next edit on any track.
Go to Previous Edit
The Go to Previous Edit button will move the playhead immediately to the splice point at the beginning
of the previous edit event for tracks which are selected for editing. If no tracks are selected for editing,
this command moves the playhead to the splice point at the beginning of the previous edit on any track.
Shuttle
The Shuttle control will move the playhead forward or backward and play audio at some percentage of
nominal play speed, according to the scale shown on the shuttle control. The range of the shuttle function
is from 0 to 1.5 times nominal play speed. Once the Shuttle control is moved, it will remain in the
position set until some other transport button is activated. The shuttle function will preempt any other
transport function and any other transport function will preempt the shuttle function.