Teac MX-2424 v1.15 - Manual (Page 38)

ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual 38
Nudge Amount
This is the amount of time by which selected edit regions or clips in the Project View Screen will be
moved when the Nudge left or Nudge right commands from the Edit menu are used.
Coarse Nudge Amount
This is the amount of time by which selected edit regions or clips in the Project View Screen will be
moved when the Coarse nudge left or Coarse nudge right commands from the Edit menu are used.
Machine Sets List
This list shows all currently available machine sets. Click on the name of a machine set to select it for
deleting.
Creating Machine Sets
For information on creating machine sets, see the section in this chapter labeled Defining Machine Sets.
Deleting Machine Sets
To delete a machine set from the current preferences file, first select the machine set by clicking on the
name of the set to be deleted, then press the Delete key.
Multi-Machine Behavior
To enable Multi-Machine Mode, select Start multi-machine from the Machine menu, select the machine
or machine set to be included and press Start.
The Preferences window has two items relating to the Multi-machine mode of operation. When the
Multi-machine mode is on, operations and commands issued for one machine are automatically
propagated to all other machines which are part of the Multi-machine group. Multi-machine mode
operation is discussed in more detail at the end of Chapter 7, Machine Settings.
Creating New Projects
When operating in Multi-Machine Mode and a new project is created on any machine on the network,
that new project will be created on all connected machines. Before creating a new project in this manner,
it is extremely important to verify that a project with the desired name of the new project does not exist
on any machine on the network.