Teac MX-2424 v1.15 - Manual (Page 24)

ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual 24
Windows NT TCP/IP Properties
Select the Protocols tab in Network window, then select TCP/IP and click on Properties. This will open
the TCP/IP Properties window.
Click on the IP Address tab, click on “Specify an IP address” and enter an appropriate IP address in the
field provided. Please note that no two computers may share an IP address, and that unpredictable
behavior is likely to occur if they do. See the discussion on IP addresses earlier in this chapter for more
information.
Use the Subnet Mask field to enter the IP Net mask. Set this value to 255.255.255.000 unless your
network administrator advises that you should use a different setting.
If you plan to connect two or more networks then you must enter an IP Gateway address. To designate a
gateway address, simply move the cursor to the Default Gateway field and enter the appropriate numbers.