Teac MX-2424 v1.15 - Manual (Page 30)

ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual 30
Type
This field shows that the connected machine is an MX-2424.
Project
This is the name of the currently loaded Project, as indicated in Setup Menu 800 of the MX-2424. Note
that if no Project is loaded, this will show the default name “MX Project.tl”. This name can also be
changed by using the Project Name item under the 800 tab in the ViewNet MX Machine Settings
window
Create a new project by using the “New Project…” item in the File menu. This menu item is only
available when in the Project View Screen.
Sync Group
This field is only used by MM series machines..
Bus status
This field shows the current status of the machine on the TL-Bus (Off, Master, or Slave). This status can
be changed by using the TL-Bus Request item under the 100 tab in the ViewNet Machine Settings
window or Menu 110 on the MX-2424.
If there is only one machine, activating the bus as either slave or master will show “master” in this field
(because there is nothing to slave to).
Sample Rate
This field shows the digital sample rate of the MX-2424 as assigned in Setup Menu 005 of the MX-2424.
This value can be changed by using the Sample Rate item under the 000 tab in the ViewNet Machine
Settings window.
Frame Rate
This field shows the Timecode Type of the MX-2424 as assigned in Setup Menu 004 of the MX-2424.
This value can be changed by using the Timecode Type item under the 000 tab in the ViewNet Machine
Settings window.
Machine Sets
This field is only used by MM series machines.