Teac MX-2424 v1.15 - Manual (Page 52)

ViewNet MX
ViewNet MX Version 1.1/1.5 Owners Manual 52
Cancel TapeMode Convert
To cancel (abort) a TapeMode conversion in progress, click the Abort button next to the Disk status
indicator. The system will ask if you are sure you want to abort the process.
To abort the conversion, click Yes. To inform you that the TapeMode conversion has been successfully
aborted, the system will show this message:
Click OK to clear the box and return to normal operation.
Delete
To delete a project from the disk, select the project in the project list then click on the Delete button. The
following safety warning will appear:
To cancel the deletion and return to normal operation, click No. To delete the project, click yes.
It is also possible to delete single tracks from a project by first selecting a track, then clicking the Delete
button. The following safety warning will appear:
To cancel the deletion and return to normal operation, click No. To delete the track, click yes.
Note that this operation will only delete the project or track (EDL) file, but will not delete any audio files
referenced by the project or track. Since it is possible for more than one project per track to reference the
same audio files, this safeguards files from being accidentally deleted that are referenced by some other
project or track. To delete the audio files that were referenced by the deleted project or track, use the