Skutch Electronics BA-1000 V3.12 Technical Reference Manual - Manual (Page 24)

Version 3.12 Page 24
Now, enter from 1 to 16 of the phone number
digits you are trying to find, then press then release
#
# # #. If the system finds an entry that matches the
input number, you will see the following (with that
phone number in the bottom of the display):
1=Change 3=Next
19167866186
When the system has found a match to your
search string, it gives you the option to change the
entry by pressing then releasing
1 1 1 1, to find the next
match by pressing then releasing 3 3 3 3 or to exit back
to the main Edit screen by pressing then releasing
~
~ ~ ~. If you press then release 1 1 1 1, it lets
you edit the number as described under Edit the
Current Number .
If the system doesn’t find any more matching
entries, it will show the following:
- Search 00000 –
Entry Not Found!
! Duplicate Delete
This mode makes the system search through the
current dialing file and mark all duplicates for
deletion; this way, only one entry of each number
stays in the file, while in
Edit Mode . To use this
feature, enter: * * * *, 4 4 4 4, # # # # at the following
screen:
0-Edit>
The system will show the following:
0 Edit> 00000
Duplicate Delete
As the system marks the duplicates, the entry
number in the top right will change to show the
current entry number. NOTE: Duplicate Delete can
take a long time to fully search the file and mark
duplicates. If you need to stop this mode, press then
release the
~ ~ ~ ~ button.
! File Restore
This feature restores all of the phone numbers
in a file, not marked for deletion, to New status,
while in Edit Mode . To use this feature, enter: * * * *,
5 5 5 5, # # # # at the following screen:
0-Edit>
The display will show the following:
0-Edit> 00000
Making #’s New
As the system restores the phone numbers, the
entry number in the top right will change to show
the current entry number.
! Exiting Edit Mode
To exit Edit mode, press then release
~ ~ ~ ~ from the main edit screen:
0-Edit>
The system will show the following:
0-Edit> 00000..
Compressing File
The 5 digits on the top right will show the
current entry number as the system compresses the
number file and deletes all the entries marked for
deletion.
* System Setup
The System Setup mode allows you to change
the operating parameters of the BA-1000. To enter
this mode press then release
~ ~ ~ ~, it will
show the following:
0-Menu-Ver 3.10A
11/01/01 08:00am
Enter: * * * * then # # # # and it will show the
following:
Set CURRENT Time
1=Change #=Next
Following is a list of the setup options in the
order you will encounter them. You can use the # # # #