beautypg.com

Playing response files, Play dial file responses, Play order taking responses – Skutch Electronics BA-1000 V3.12 Technical Reference Manual User Manual

Page 21: Play the previous response, Skip a response file

background image

Version 3.12

Page 21

Enter:

9

9

9

9 then #

#

#

#; if the system hasn’t

recorded any response prompts, it will Beep 2 times
and return to the MENU. When you enter this mode
the display shows the following:

0=Play <<00000>>
1=Back 2=Advance

The 5 digit number in the top right of the

display shows the current response file to play.

!

Playing Response Files

Pressing then releasing

0

0

0

0 will play all

response files, one after the other, starting from the
file indicated in the top right of the display.
Playback can be stopped at any time be pressing
then releasing the

~

~

~

~ button. You can re-

play the current response by pressing then releasing
1

1

1

1 while it is playing. You can skip the rest of the
current response, and start playing the next one, by
pressing then releasing

2

2

2

2 while it is playing.

Before each file is played, the system will show the
following screen:

Response 00000
Lead Total 00001

The top entry tells you which response is going

to be played now, and the bottom entry tells you
how many responses are on the drive.

Play Dial File Responses

When the system plays a response file recorded

from Dial File mode, the screen will look as
follows:

xxxxxxxx Playing
7866186

The x’s on the top left are place holders for the

polling responses. When a polling question is asked,
the system will replace the corresponding x with the
number that was dialed; if no number was dialed, the
display will keep the x. The bottom will show:
" The phone number dialed.
" Any numbers input from a Get Number Input

code.

" At playback end, it shows the phone number

dialed again.
When finished playing the last response file, the

system will beep 4 times and show the following:

0=Play <<00000>>
1=Back 2=Advance

Play Order Taking Responses

When the system plays a response file recorded

from Order Taking mode, the screen will look as
follows:

xxxxxxxx Playing
08:02 10/01

The x’s on the top left are place holders for the

polling responses. When a polling question is asked,
the system will replace the corresponding x with the
number that was dialed; if no number was dialed, the
display will keep the x. The bottom will show:
" The time the call came in (the 1

st

5 digits are the

hour, 08 = 8 o’clock, the : is a spacer, then the
minute, 02 = 2 minutes after the hour), the last
5 digits are the month the call came in, the / is a
spacer, then the day the call came in).

" Any other numbers input from a Get Number

Input code.

" At playback end, it shows the time and date

again.
When finished playing the last response file, the

system will beep 4 times and show the following:

0=Play <<00000>>
1=Back 2=Advance

!

Play The Previous

Response

To play the response you just finished listening

to (if it wasn’t the last response recorded), just press
then release

1

1

1

1 when the following screen is

shown:

0=Play <<00000>>
1=Back 2=Advance

!

Skip a Response File

To skip the current response, press then release

2

2

2

2 from the following screen (or while the
response is playing back):

0=Play <<00000>>
1=Back 2=Advance