Skutch Electronics BA-1000 V3.12 Technical Reference Manual - Manual (Page 11)

Version 3.12 Page 11
Time Saver Entry Mode
This mode lets you enter the common
beginning for your phone numbers once, then it
automatically puts it in for you so you only have to
enter the last part of each phone number. You turn
this feature on by entering the common part of the
phone number then
* * * *, 0 0 0 0 and # # # #. This mode
stays on until you exit number entry mode, or turn it
back off by entering
* * * *, 0 0 0 0 and # # # #.
• Example
You need to enter: 7860020, 7860022,
9167860030, 19167860040, 7730050, 7730060, you
would do the following:
Display shows:
0-Entry> 00000 N
Enter:
786*0# 786*0# 786*0# 786*0#
Display shows:
0-Entry> 00000 N
786
Enter:
0020# 0020# 0020# 0020#
0022#
0022# 0022# 0022#
*0#
*0# *0# *0#
Display shows:
0-Entry> 00002 N
Enter:
9167860030# 9167860030# 9167860030# 9167860030#
19167860040#
19167860040# 19167860040# 19167860040#
Display shows:
0-Entry> 00004 N
Enter:
773*0# 773*0# 773*0# 773*0#
Display shows:
0-Entry> 00004 N
773
Enter:
0050# 0050# 0050# 0050#
0060#
0060# 0060# 0060#
~
~ ~ ~
3 Dial File
Memory dialing allows the user to dial the
phone numbers that are stored in the current dialing
file. To enter this mode press then release
~
~ ~ ~, it will show the following:
0-Menu-Ver 3.10A
11/01/01 08:00am
Enter: 3 3 3 3 then # # # # and it will show the
following:
0-Entry> 00000
---- #=Dial ----
By default, if you enter a # # # # at this point, the
system will resume calling from where it left off at
the last calling session (on a new list of numbers, it
starts at the first entry).
! Area Code Entry
If you enter this mode, and you have not
entered the local area code, the system will first
show the following:
Enter Local Area
Code, # =
You MUST enter the area code the system will
be calling from, then # # # #. You can enter * * * * then
# # # # to remove an area code.
! Variable Start Entry
The variable start entry lets you force the BA-
1000 to start calling from any entry position you