Skutch Electronics BA-1000 V3.12 Technical Reference Manual - Manual (Page 15)

Version 3.12 Page 15
! Copy System
This screen lets you copy the system
information settings from one disk to another disk; it
will show the following:
1=Copy System
3=Next Option
NOTE: Make sure you have already formatted
the COPY ZIP disk (See Prepare to Copy ). You can
press then release 1 1 1 1 to copy the prompts, or 3 3 3 3
to go to the next screen.
If you press then release 1 1 1 1, it will show the
following:
Put COPY into
-- Zip Drive—
Now take that MASTER disk out and insert the
COPY disk. After some initial setup, it will show
the following:
Put MASTER into
-- Zip Drive—
Now take the COPY disk out and put
(MASTER disk back in and keep swapping disks, as
indicated, until it finishes copying.
! Copy Do Not Dial List
This screen lets you copy the DO NOT DIAL
LIST from one disk to another disk; it will show the
following:
1=Copy No List
3=Next Option
NOTE: Make sure you have already formatted
the COPY ZIP disk (See Prepare to Copy ). You can
press then release 1 1 1 1 to copy the prompts, or 3 3 3 3
to go to the next screen.
If you press then release 1 1 1 1, it will show the
following:
Put COPY into
-- Zip Drive—
Now take that MASTER disk out and insert the
COPY disk. After some initial setup, it will show
the following:
Put MASTER into
-- Zip Drive—
Now take the COPY disk out and put
(MASTER disk back in and keep swapping disks, as
indicated, until it finishes copying.
! Prepare to Copy
First, press ~ ~ ~ ~ to return to the
MENU.
Now, eject your current disk; during this copy
process, it will be referred to as the MASTER disk
throughout this process.
Insert a new blank ZIP 100 disk and wait until
it comes up to the MENU; it will be referred to as
the COPY disk throughout this process.
Now, eject the COPY disk and re-insert the
MASTER disk and continue at the beginning, 5
Disk Tools .
6 Dial Report
This mode allows you to view the basic
breakdown of the calls from the last dial session. To
enter this mode press then release
~ ~ ~ ~, it
will show the following:
0-Menu-Ver 3.10A
11/01/01 08:00am
Enter: 6 6 6 6 then # # # # and it will show the
following:
- Total Calls –
00000 --- #=Next
To move through the report just press then
release the # # # # button at each new entry.
! Total Calls
This entry shows the total phone call attempts
the system made during the last dial session. Press
then release
# # # # to continue to the next entry, or
~ ~ ~ ~ to return to the MENU.