Dialing status, Mark deletes, Search mode – Skutch Electronics BA-1000 V3.12 Technical Reference Manual User Manual
Page 23
Version 3.12
Page 23
by just pressing then releasing
#
#
#
#. Once you
change the phone number, the status will
automatically change to “N”.
The dialing status can only be changed after
you have either: entered a new number followed by
#
#
#
#, or pressed then released #
#
#
# to leave the
number unchanged. You can change the dialing
status by pressing then releasing
*
*
*
*, repeatedly,
until the status you want appears, then press then
release
#
#
#
#. You can leave the status as is by
pressing then releasing
#
#
#
#.
The different dialing status’ are as follows:
Dialing Status
" N = New number, never dialed.
" L = Lead, a qualified “Hello” response
detected.
" B = Busy number.
" R = Recorded Message, called party talked too
long when answering the phone.
" U = Unanswered call.
" A = Answering Machine.
" F = Fax Machine.
" D = Do Not Dial, set for no dial.
" C = Chained, this entry chained to the next one.
" O = Reorder Disconnect, like a fast busy,
indicates the number hung up.
" S = SIT, recorded operator message with 3
increasing tones at the front.
" I = Industry, a qualified Business introduction
detected.
" x = Delete, this # will be deleted on exiting
Edit Number mode.
!
Mark Deletes
This feature makes the system go through the
entire file and mark the response type, you select, for
deletion, while in
. To use this feature,
enter:
*
*
*
*, 2
2
2
2, #
#
#
# at the following screen:
0-Edit>
The system will show the following for 2
seconds:
0-Edit> 00000
Delete Numbers
The system will then show the following:
Enter Type = 0-9
#=New Number
The available types are as follows:
"
0
0
0
0 = New Number, never called numbers.
"
1
1
1
1 = Hello Response, numbers with a valid
“Hello” response.
"
2
2
2
2 = Busy Number, busy numbers.
"
3
3
3
3 = No Answer, several rings & no one
answered.
"
4
4
4
4 = Fax Machine, fax machine.
"
5
5
5
5 = Recorded Msg., operator recorded
message.
"
6
6
6
6 = Reorder Signal, operator disconnect
signal like a fast busy.
"
7
7
7
7 = SIT Signal, operator recorded message
with three increasing tones at the front.
"
8
8
8
8 = Answer Machine, answering machine.
"
9
9
9
9 = Business Intro, numbers with a valid
business introduction.
Once you have selected the response type, press
#
#
#
# the system will show the following:
Are you Sure?
1=Yes ----- 3=No
Press
1
1
1
1 and the system will mark all of those
numbers for deletion, or press
3
3
3
3 or ~
~
~
~
to abort that operation. As the system marks the
phone numbers, the entry number in the top right
will change to show the current entry number.
!
Search Mode
The system incorporates a progressive search
mode that lets you enter a string, from 1 to 16 digits
long, that the system will search the current dialing
file for, while in
. To use this feature,
enter:
*
*
*
*, 3
3
3
3, #
#
#
# at the following screen:
0-Edit>
The system will display the following:
- Search Mode –