Skutch Electronics BA-1000 V3.12 Technical Reference Manual - Manual (Page 10)

Version 3.12 Page 10
*01 *01 *01 *01 to 09 09 09 09 – Pause for 1 to 9
seconds.
*1 *1 *1 *1 – Wait for return dial tone.
*2
*2 *2 *2 – Wait for 5 seconds of silence.
*3
*3 *3 *3 – Dial a touch tone *.
*4
*4 *4 *4 – Dial a touch tone #
*5
*5 *5 *5 – Dial the rest of the phone number
string as touch tones.
*60 *60 *60 *60 – End the call, as a Response,
without doing anything else (like playing a
message).
! Exiting
To exit this mode, you can return to the MENU
or go directly to DIAL FILE mode from the
following screen:
0-Entry> 00000 N
Return to MENU
To return to the MENU, press then release
~ ~ ~ ~ while it shows the following:
0-Entry> 00000 N
Start dialing the numbers
To start dialing the numbers, enter * * * *, 9 9 9 9,
# # # # and it will show the following:
0-Entry> 00000
---- #=Dial ----
Press then release # and the system will go start
calling the numbers.
! Advanced Features
All of these advanced features are accessed
from the main Number Entry screen; once you have
entered Number Entry mode.
Back Up
If you’re entering numbers, and find that you
made a mistake on a previous number, enter * * * *,
7 7 7 7, # # # # enough times to back up to the entry you
want. Then just enter the correct number. When
you press then release
# # # #, the new number will be
saved and you will go to the end of the file.
Auto Fill Mode
You can have the system automatically
generate a range of phone numbers by using the
AUTO FILL mode. NOTE: You cannot use this
mode when the Do Not Dial file is selected. To
use this feature press then release
* * * *, 8 8 8 8, # # # #.
The display will show the following:
STARTING phone #
You enter a seven to eleven digit starting phone
number (no * * * *’s allowed), followed by # # # #. The
starting phone number can end with 0000; i.e.
7860000 is a valid start number. The display will
show the following:
END suffix (4)
9999
The system uses the default of 9999 if you press
then release # # # #; or press then release any digit to
clear the display, then enter a new 4 digit end suffix
(no
* * * *’s allowed), followed by # # # #. The end
suffix is the last four digits in the phone number that
you don’t want to go past; i.e. the end suffix of
7866186 is 6186. Once this is entered, the system
will show the following:
0-Entry> 00000 N
Making Numbers
You can stop the auto-generation at any time by
pressing then releasing the ~ ~ ~ ~ button.
The system will show the current entry number it is
generating in the top right of the display. When
finished, you will be at the end of the current list of
numbers and you can continue with regular number
entry or use AUTO FILL mode again.