RLE Wi-MGR V.1.6 - Manual (Page 53)

rletech.com Wi-MGR User Guide 53
3 Web Interface
3.5.7 SNMP
Use this page to configure the Wi-MGR for SNMP communications.
Figure 3.14 SNMP Page
Option Description
System Name Name assigned to the Wi-MGR for SNMP system configuration.
Default setting: Wireless Gateway
System Contact System contact responsible for the Wi-MGR.
System Location Enter the address of the Wi-MGR’s physical location.
Communities
Identify devices that receive Traps and/or Syslog messages from the Wi-MGR and
communicate with the Wi-MGR over the network.
IP Address IP address used by the SNMP server to poll data from the Wi-MGR.
Community String Name or type of password used by the SNMP server for
communications.
Write Allows the SNMP server to write back to the Wi-MGR.
Trap Allows the Wi-MGR to send a message to the SNMP Management
Server, telling the system to initiate an alarm.
Table 3.10 SNMP Options