RLE Wi-MGR V.1.6 - Manual (Page 42)

42 Wi-MGR User Guide 800.518.1519
3 Web Interface
3.5.2 Digital IO
The Wi-MGR is equipped with four hard-wired digital inputs and two hard-wired relay
outputs. Use this page to individually configure the digital inputs and relay outputs.
NOTE The Wi-MGR firmware is backwards compatible. This means it can be loaded onto older
versions of the Wi-MGR, including the FDS-Wi, which are not equipped with wired inputs
and outputs. If this firmware is loaded on a unit without wired inputs and outputs, the Digital
IO menu option will not be accessible.
Figure 3.9 Digital IO Configuration Page