RLE Wi-MGR V.1.6 - Manual (Page 41)

rletech.com Wi-MGR User Guide 41
3 Web Interface
Ethernet Packet
Repeat
Use this feature to allow the Wi-MGR to transmit sensor information
over the network (via port 6767) to another Wi-MGR. If this option is
enabled, you also need to designate a destination IP address.
Default: Disabled
Repeat Packets Designate whether the Wi-MGR will repeat only information for
sensors that are already configured within the system (Matching) or
whether it will repeat any information it receives, regardless of
whether the sensor is configured within the Wi-MGR.
Default: Matching
Repeat Min Interval The minimum number of seconds that passes between
transmissions.
Destination IP
Address
Enter the IP address of the Wi-MGR with which you wish to transmit
sensor information.
Enter the IP address of the other Wi-MGR.
Option Description
Table 3.4 Wireless Sensors Configuration Options