RLE Wi-MGR V.1.6 - Manual (Page 37)

rletech.com Wi-MGR User Guide 37
3 Web Interface
Option Description
Wi418/433 Receiver The Wi-MGR is equipped with either a 418 or 433MHz receiver.
Enabled: Turns on the Wi-MGR’s 418 or 433MHz receiver. This
allows it to communicate with devices communicating on the 418/
433MHz wavelength.
Disabled: Turns the receiver off and prohibits the Wi-MGR from
communicating with devices on this wavelength.
Default: Enabled
Wi900/2.4G Receiver The Wi-MGR is equipped with either a 900MHz or 2.4GHz receiver.
Enabled: Turns on the Wi-MGR’s 900MHz or 2.4GHz receiver. This
allows it to communicate with devices communicating on the
900MHz or 2.4GHz wavelength.
Disabled: Turns the receiver off and prohibits the Wi-MGR from
communicating with devices on this wavelength.
Default: Enabled
900MHz Radio
Configuration
Designate specific point repeaters that the Wi-MGR will
communicate with. This option is only on systems utilizing BAPI
point repeaters.
Configuration information should be included with the BAPI
repeaters. For reference, network ID and Hop Table information is
as follows:
Table 3.4 Wireless Sensors Configuration Options