RLE Wi-MGR V.1.6 - Manual (Page 21)

rletech.com Wi-MGR User Guide 21
2 Getting Started
have come from the sticker at the end of the battery. If necessary, wipe the battery and clips
with rubbing alcohol to remove any sticky residue. Replace the lid.
Figure 2.11 Remove the Battery’s Protective Tab
4 Turn the sensor over to show the product label on the bottom. This label contains the serial
number of the sensor. The serial number is unique to each sensor, and appears in the table
on the Sensors page of the web interface once the sensor has been discovered by the
Wi-MGR.
Figure 2.12 Sensor’s Serial Number on Product Label
5 Go to the Sensors page of the Wi-MGR’s web interface and confirm the placement in the
sensor discovery list.
Figure 2.13 Verifying a Sensor’s Discovery