RLE Wi-MGR V.1.6 - Manual (Page 33)

rletech.com Wi-MGR User Guide 33
3 Web Interface
Low Humidity Alarm
Threshold
Enter a low humidity alarm threshold - if the humidity drops below
this value, a low humidity alarm is generated.
Alarm Delay The number of seconds that pass between the time the system
goes into alarm and the time that alarm is annunciated.
High Temperature
Warning Threshold
Enter a high temperature warning threshold - if the temperature
rises above this value, a high temperature warning is generated.
Low Temperature
Warning Threshold
Enter a low temperature warning threshold - if the temperature
drops below this value, a low temperature warning is generated.
High Humidity
Warning Threshold
Enter a high humidity warning threshold - if the humidity rises above
this value, a high humidity warning is generated.
Low Humidity
Warning Threshold
Enter a low humidity warning threshold - if the humidity drops below
this value, a low humidity warning is generated.
Warning Delay The number of seconds that pass between the time the system
goes into a warning state and the time that warning is annunciated.
Contact Alarm
(Wi-DIT/Wi-TC9/
Bapi-WDI)
Designate if the default state for the alarm is normally open or
normally closed.
Designate whether you are monitoring the point for status, or for an
alarm condition.
Default = NC, Alarm
Active Relay on
Alarm
If the sensor goes into alarm, will it activate a relay? If so, designate
which relay or relays it will activate.
Default = None
Option Description
Table 3.3 Wireless Sensor Configuration Options (continued)