RLE LD5000 - Manual (Page 27)

User Guide: LD5000 Chapter 7: LCD Setup Menu
www.rletech.com 970.484.6510 19
7-4 FT/M FUNCTION
The Ft/M function designates whether the unit’s distance readings are displayed in feet or meters. Press
Esc to exit and return to the Setup Menu.
7-5 CALIBRATE
The Calibrate option allows users to manually input the number of feet of cable connected to the LD5000.
This automatically calibrates the system to the cable length entered. Enter the exact cable length attached
to the system to ensure accurate calibration. Press the Esc key to exit and return to the Setup Menu.
Cable Auto Calibrate
:
Step 2 of 4
Cable Auto Calibrate
Step 1 of 4
NOTE
It may be necessary to restore the system to factory defaults before
calibrating, or if the following error message is received on the LCD display:
“Error Length Not in Range Press Any Key To Return”
Select Feet / Meters
->Feet Meter
Enter Realarm (Min):
000
^
Enter Cable Length:
1000ft
^^
Range (901-1101)
Cable Break Alarm
Can’t Calibrate
Press Any Key
To Return Leak Detected Alarm
Can’t Calibrate
Press Any Key
To Return
Error
Length Not In Range
Press Any Key
To Return