RLE LD5000 - Manual (Page 24)

Chapter 6: LCD Main Menu User Guide: LD5000
16 970.484.6510 www.rletech.com
6-4 SYSTEM
The System option displays the System Menu. This menu allows a user to map the water leak detection
cable that is attached to the LD5000. Mapping the cable is a key step in pinpointing a leak. Cable should
not be mapped until it is properly installed in its intended area, and the system is calibrated for the length of
cable installed. Whenever additions or adjustments are made to the water leak detection cable, the cable
should be remapped.
6-4.1 ViewMap
The ViewMap option allows the user to view the current system map.
6-4.2 StartMap
The StartMap option begins the mapping process:
For a complete set of LCD interface cable mapping instructions, refer to Chapter 8: Mapping the Cable.
Press the Esc key to exit and return to the Main Menu.
Mapping Data: 5/6
Pnt#5 Dist=494ft
Pnt#6 Dist=675ft
->Down
Mapping Data: 3/6
Pnt#3 Dist=247ft
Pnt#4 Dist=378ft
->Down ->Up Mapping Data: 1/6
Pnt#1 Dist=68ft
Pnt#2 Dist=176ft
->Up
** System Menu **
->ViewMap StartMap
Modify Trend
Interval
1440 Minutes
+/- then (Enter)
Clear the Trend Log?
Accept -> Cancel Clear the Alarm Log?
Accept -> Cancel
Trend Data: 4/4
TD004-Leakage=0uA
01/12/01 16:02:56
Down ->Up Trend Data: 3/4
TD003-Leakage=0uA
01/12/01 16:02:57
Down ->Up