REMKO Multi-talent - Manual (Page 22)

REMKO HEAT PUMP MANAGER
Various values are summarised here in order toe enable quick access for customer service.
The input of the code number is necessary for some functions.
The relay test and sensor test are automatically reset after 1 minute!
Sensor test no.
Sensor no. REMKO
Sensor desig-
nation Description
01 Bottom storage tank sensor
02 FBR-2 Room temperature Heating circuit 1, use for analogue remote control FBR-2
03 FBR-2
Buffer tank temperature top.
Analogue remote control FBR-2
04 not used
05 F5 Supply temperature heating circuit 2 (mixer circuit)
06 F6 Hot water temperature top (process water tank)
07 not used
08 F8 Collector temperature (collective supply temperature sensor)
09 F9 Outdoor temperature
10 not used
11 F11
For CMF 80/90/140/150 and CMT 100/150:
Supply temperature heating circuit 1 (direct heating circuit) or
for EMF/EMT 100, CMF/CMT 120, EMF/EMT 150 and CMF/CMT 160:
Supply temperature heat pump
12 F12 Hot water temperature bottom (reference sensor for solar regulation)
13 F13 not used
14 F14
Solar system collector temperature or solid-fuel-boiler
(Attention: Control characteristic Pt 1000)
15 F15 Status of the switch input signal: Power supply plant enable/disable
16 not used
17 F17 Return temperature sensor
Level 4 - SERVICE - Description of parameters and settings
22