REMKO Multi-talent - Manual (Page 21)

Various values are summarised here for the user to provide quick access.
Designation Factory setting Description
Time
The controller's time display (The time can only be set using Terminal Time).
If a controller was set as Time Master for the heating system (time standard for
all controllers), entering the time in the system's other controllers is blocked.
(As a maximum, only one Time Master can be set at the BUS).
Date The controller's date display (The date can only be set using Terminal Date).
Holiday start Off Setting the first holiday (no more heating beginning from this day).
Holiday end Off Setting the last holiday (there will be no more heating until this day).
Summer time setting
start
The automatic switch from summer time to winter time is made possible with
the input of the date.
The earliest date on which switchover takes place is to be set.
The controller carries out the time switch on the Sunday following the set date
at 02:00 or 03:00 in the morning.
Summer time setting
end
Level 4 - TIME-DATE - Description of parameters and settings
21