Appendix b - vcc-x lcd screens, Alarm screens, Vcc-x controller technical guide 86 alarm screens – Orion System VCC-X Controller User Manual
Page 86

APPENDIX B - VCC-X LCD SCREENS
VCC-X Controller Technical Guide
86
Alarm Screens
If there are no Alarms, the Alarm Screen will display “No Alarms.” If
there are alarms present, the screen will display, “Alarms.” You must
press
to scroll through the alarms. For alarm defi nitions
and troubleshooting, see pages 66-69.
Alarms
or No Alarms
Alarms
The screen will display the alarms as follows:
No Alarms
SAT SENSOR
See Supply Air Temperature Sensor
Failure Alarm, page 67.
OAT SENSOR
See Outdoor Air Temperature Sensor
Failure Alarm, page 67.
SPC SENSOR
See Space Temperature Sensor Failure
Alarm, page 67.
MAIN EXP MISSING
See Missing Expansion Module Alarm,
page
67.
CO2 SENSOR
See CO
2
Sensor Failure Alarm, page 67.
SUCTION SENSOR
See
Low
Suction Pressure Sensor Alarm,
page
67.
OAT CFM SENSOR
See
Airfl ow Alarms, page 67.
EX CFM SENSOR
See Airfl ow Alarms, page 67.
SA CFM SENSOR
See Airfl ow Alarms, page 67.
RA CFM SENSOR
See Airfl ow Alarms, page 67.
REHEAT ALARM
See Missing Expansion Module Alarm -
Reheat Board Missing, page 67.
MODGAS ALARM
See Missing Expansion Module Alarm -
MODGAS Board Missing, page 67.
Alarm Screens
RLY EXP ALARM
See Missing Expansion Module Alarm,
page
67.
COOLING FAILURE
See Mechanical Cooling Failure Alarm,
page
67.
HEATING FAILURE
See Mechanical Heating Failure Alarm,
page
67.
FAN POF FAILURE
See Proof of Flow Interlock Alarm,
page
67.
DIRTY FILTER
See Dirty Filter Alarm, page 67.
EMERG SHUTDOWN
See Emergency Shutdown Alarm,
page
67.
HI SAT ALARM
See High and Low Supply Temp Alarm,
page
68.
LO SAT ALARM
See High and Low Supply Temp Alarm,
page
68.
CONTROL TEMP HI
See High and Low Control Temp Failure,
page
68.
CONTROL TEMP LO
See High and Low Control Temp Failure,
page
68.
HIGH HEAD
See High Head Pressure Alarm, page 68.
PRESSURE
ECONO TITLE 24
See Title 24 Economizer Alarms,
page
68.
????? ALARMS
This screen should never display. But if it
does, it means the controller doesn’t know
what the alarm is.