Overview, Parts and descriptions, 10 vcc-x controller technical guide – Orion System VCC-X Controller User Manual
Page 10

OVERVIEW
10
VCC-X Controller Technical Guide
Parts and Descriptions
PART NO.
PART DESCRIPTION
ILLUSTRATION
PAGE NO.
EBC-1-F
EBC-1.5-F
EBC-3-F
EBC-10-F
EBC-25-F
EBC-37-F
EBC-50-F
EBC-75-F
EBC-100-F
EBC-150-F
EBC-250-F
EBC-SPOOL
EBC E-BUS Cables
The EBC E-BUS Expansion Cables attach to the VCC-X Controller,
VCC-X Expansion Modules, and E-BUS Sensors. The EBC E-BUS cables
can be crimped and clamped to the E-BUS connector. Different lengths
can be joined together using an E-BUS extension adapter. The EBC
E-BUS Cables are available in 1, 1.5, 3, 10, 25, 37, 50, 75, 100, 150, 250
& 1000 feet lengths. Includes: EBC E-BUS Cable Assembly.
N/A
OE250
Outdoor Air Temperature Sensor
Used for temperature sensing applications. Includes: 10k Ohm Outside Air
Temperature Sensor, 2 wire, mounted in a weatherproof handy box only.
Page 30
OE271
Duct Static Pressure Sensor
Used for duct static pressure sensing applications. Includes: 0-5″ W.C.,
0-5 VDC, Static Pressure Sensor only.
Page 33
OE258-01
Building Static Pressure Sensor
Used for Building Pressure Sensing. Includes: -0.25 to +0.25″ W.C., 0-5
VDC, 24 VAC/VDC supply power Building Pressure Sensor only.
Page 28
OE290
Static Pressure Pick-up Tube
Used with OE271 Static Pressure Sensor for static pressure sensing ap-
plications. Includes: Static Pressure Pick-up Tube with 1 ft. length of FRP
tubing, gasketed mounting bracket, and screws.
Page 33
OE230
OE231
Duct Temperature Sensor - 6” Probe
Duct Temperature Sensor - 12" Probe
OE230 = 6″ probe length. OE231 = 12″ probe length. Used for return or
supply air temperature sensing applications. Includes: 10k Ohm Duct
Temperature Sensor, 2 wire only.
Pages
26 & 27
OE392-
10-VCCX
(Future)
System Manager Touch Screen II (In Development)
The System Manager TS II provides a direct, graphic-enhanced, menu-
driven link to enable the system operator to view the status and adjust the
setpoints of any controller on the VCC-X control system. The System Man-
ager TS is equipped with a 4.3” 480 x 272 WQVGA RGB TFT LCD Touch
Screen Display. The System Manager TS is furnished with hardware for
fl ush mounting into hollow drywall or surface mounting on concrete brick
or plaster surfaces. Includes: System Manager TS with 12 ft. long pigtail
cable assembly.
See System
Manager
Touch
Screen II
Technical
Guide
OE391-12
Modular Service Tool SD
Includes: Modular Service Tool, power supply, communication cables,
4 Gigabyte SD card, and (4) AA batteries. Used to program and monitor
all Orion controllers.
Mode
Selection
6
5
4
7
0
8
1
3
2
9
-
See VCC-X
Controller
Operator
Interfaces
SD
Technical
Guide