NewTek 3Play 820 - Manual (Page 89)

Page | 75
7 I/O CONFIGURATION
NewTek 3Play™ provides extensive control over your video signal at
both input and output stages. In addition to broad format an
connection options for audio and video inputs, each video source
has its own realtime Proc Amp. As well, independent Proc Amps
are provided for both outputs.
Other important options include Multiview support on a secondary
monitor, external timecode and genlock configuration.
It is very useful to be able to configure each source and also the outputs independently. Source
configuration options ensure that you can match camera inputs to each other, and that their
signals fall within legal ranges, and even mix and match different types of camera (to a point).
Output Proc Amp settings allow you to make adjustments for special purposes.
Let’s begin with a consideration of Output Configuration tools.
7.1 OUTPUT CONFIGURATION
Figure 65
Roll the mouse pointer over the Configure button (Figure 65) above the top-right corner of the
monitor for Output B, and click it to open the Output Configuration panel (Figure 66).
Output Configuration has four tabbed panes (Figure 66). Two tabs are labeled Output A and
Output B, and contain identical controls discussed momentarily.
The Aux/Multiview tab relates to optional secondary display(s) for monitoring purposes, while
the Genlock tab is home to important video timing calibration controls.