NewTek 3Play 820 - Manual (Page 48)

Page | 34
The Gain slider defaults to 0dB on first launch. After adding audio sources, slowly adjust the
slider to achieve an appropriate signal level (use the VU meters in the titlebar above the monitor
as an aid.)
Hint: Most numeric controls in on the Replay Desktop can be reset to their defaults using Shift +
double-click on the control knob.
3.12 NETWORKING
Connecting 3Play™ to a local area network (LAN) may require additional steps beyond those
mentioned back when we discussed Microsoft Windows™ activation (Section 3.2). Here is the
basic procedure involved in joining a workgroup:
1. Connect a suitable cable from the ETHERNET port on 3Play’s backplate to your external
network.
2. (If necessary) – close the Replay Desktop; click the Back arrow to return to the Home
Page.
3. Click Shutdown, then select Exit to Windows at right to access the operating system’s
own desktop.
4. Right-click on the My Computer icon, and select Properties.
5. Scroll down in the right hand pane of the System panel that opens to find the Computer
name, domain and workgroups settings area.
6. Click the Change Settings link at right.
7. Click the Computer Name tab of the System Properties panel that opens.
8. Click the Change button, and enter the name of your local workgroup, as provided by
your system administrator.
9. Close the OK button.