Comtech EF Data DT-4500-A Series - Manual (Page 91)

DT-4500-A Series Downconverters Revision 1
Ethernet-based Remote Product Management MN-DT4500A
6–5
An example of login and remote command/query execution, when using HyperTerminal as the
interface, is shown here:
6.4 45xxA Web Server (HTTP) Interface
A user-supplied web browser allows the full monitor and control (M&C) of the DT-4500-A
through its 45xxA Web Server Interface. This embedded web application is designed for, and
works best with, Microsoft’s Internet Explorer Version 5.5 or higher (the examples shown use
Internet Explorer Version 9.0).
See Chapter 5. FRONT PANEL OPERATION or the Remote Commands Specifications tables found
in Appendix A. REMOTE CONTROL for detailed descriptions of many of the functions depicted
throughout Sect. 6.4.5 Web Server Page Descriptions.
6.4.1 Enabling the Web Server Interface
The IP Address can be verified from the front panel menus:
CONFIG: REMOTE
 ETHERNET  ADDRESS. See Chapter 5. FRONT PANEL OPERATION for
complete details about using this M&C interface.
To enable the Web Server Interface in the DT-4500-A using only a 100BaseTx remote interface
(this assumes you are running Microsoft Windows OS):
1. Select Start, then Run, then type “cmd”
to open the command prompt window:
2.
Start a Telnet session with the unit at the default
IP address (this example uses 192.168.1.4):
3. Enter the Telnet username and password (the
default for both parameters is comtech):