Comtech EF Data DT-4500-A Series - Manual (Page 105)

DT-4500-A Series Downconverters Revision 1
Ethernet-based Remote Product Management MN-DT4500A
6–19
6.4.5.3.4 Config | Utility
Use this page to configure DT-4500-A operating parameters.
Figure 6-9. Config | Utility page
Click [Refresh] to update the page with its latest operating parameters.
Date
Enter a date in the form MM/DD/YY (where MM = month [01 to 12], DD = day [01 to 31], and YY
= year [00 to 99]).
Time
Enter a time in the form HH:MM:SS (where HH = hour [00 to 23], MM = minutes [00 to 59], and
SS = seconds [00 to 59]).
Click [Change Date/Time] to save.
Circuit ID
Enter a Circuit ID string of up to 48 characters, and then click [Change CID] to save.
Current Active Firmware Image (read-only)
This section identifies the selected Current Active Firmware Image. In this example, Image 2 is
the Current Active Firmware Image.