Comtech EF Data DT-4500-A Series - Manual (Page 128)

DT-4500-A Series Downconverters Revision 1
Appendix A MN-DT4500A
A–18
A.7.2.10 Clear Preset Configuration
Use this command to clear a single preset value.
Command Details
Clear a Preset: _nn'cr'
Confirmation: >DEV/CLR_nn_Cleared'cr''lf']
Note: nn = Preset Number = 01 to 32.
A.7.2.11 Select Preset Configuration
Use this command to configure the converter to the frequency and attenuation data assigned to
a given preset number.
Command Details
Select Preset: _nn'cr'
Confirmation: >DEV/SEL_nn_Selected'cr''lf']
Note: nn = Preset Number = 01 to 32.
Only programmed preset numbers are available.