Comtech EF Data DT-4500-A Series - Manual (Page 75)

DT-4500-A Series Downconverters Revision 1
Front Panel Operation MN-DT4500A
5–7
CONFIG: Remote Control  ETHERNET  ADDRESS
IP Address/Range:
192.168.001.002/24
To edit the IP Address and Range for the Ethernet M&C port for this unit: First, use the ◄ ►
arrow keys to select the digit to edit, and then use the ▲ ▼ arrow keys to edit the value of that
digit. Press ENTER when done.
CONFIG: Remote Control  ETHERNET  GATEWAY
Ethernet IP Gateway:
192.168.001.002
To edit the IP Gateway Address for the Ethernet M&C port for this unit: First, use the ◄ ►
arrow keys to select the digit to edit, and then use the ▲ ▼ arrow keys to edit the value of that
digit. Press ENTER when done.
CONFIG: Remote Control  ETHERNET  SNMP
COMMUNITIES TRAPS
Use the ◄ ► arrow keys to select the parameter to configure: COMMUNITIES or TRAPS.
CONFIG: Remote Control  ETHERNET  SNMP  COMMUNITIES
SNMP Communities:
READ WRITE TRAP
Use the ◄ ►arrow keys to select READ, WRITE, or TRAP, and then press ENTER.
CONFIG: Remote Control  ETHERNET  SNMP 
COMMUNITIES READ
Read Community:
public
You may view or edit the SNMP Read Community string. To edit, first use the ◄
► arrow keys to select the character to edit, and then use the ▲ ▼ arrow keys
to edit that character. Press ENTER when done.
CONFIG: Remote Control  ETHERNET  SNMP 
COMMUNITIES WRITE
Write Community:
private