Comtech EF Data SNM-1002 - Manual (Page 87)

SNM-1002 LinkSync
 Modem
Revision 2
Operation MN/SNM1002.OM
3–47
FPGA FIRWARE
FW/NNNNNN-DDR
Displays the FPGA module firmware version.
The display includes the month, day, and year.
3.4.5.4.14 SYSTEM:DEMO MODE
DEMO MODE
OFF
Turn all FAST features ON that are installed in the modem for 60 minutes.
During this time period, the operator is encouraged to implement the features
and discover the capablilites of the different options. After the 60-minute
time limit, the modem resets to its previous configuration.
3.4.5.4.15 SYSTEM:EXT AGC: MAX PWR
EXT AGC: MAX PWR
0.0 VOLTS
Sets the AGC voltage for a receive signal level of -60.0 dBm. The voltage range is 0.0 to
10.0V, in 0.5V steps.
Upon entry, the current external AGC voltage level is displayed. Press [
↑] or [↓] to
increment or decrement the AGC voltage level in 0.5V steps. Press [ENTER] to execute the
change.
Note: For any receive signal level between -25.0 and -60.0 dBm, the software will
interpolate the required AGC voltage.
3.4.5.4.16 SYSTEM:EXT AGC: MIN PWR