Comtech EF Data SNM-1002 - Manual (Page 43)

SNM-1002 LinkSync
 Modem
Revision 2
Operation MN/SNM1002.OM
3–3
3.1.2 Front Panel Keypad
The front panel keypad permits local operation of the modem. The keypad consists of six
keys (Figure 3-2). It is locked out for normal use.
ENTER
CLEAR
Figure 3-2. Keypad
Each key provides one or more logical functions. These functions are defined in the
following table.
ENTER This key is used to select a displayed function or to execute a modem
configuration change.
CLEAR This key is used to back out of a selection or to cancel a configuration change
which has not been executed using [ENTER]. Pressing [CLEAR] generally
returns the display to the previous selection.
Left and Right
Diamond Keys These keys are used to move to the next selection or to move the cursor for
certain functions.
Note: Throughout this chapter, [
← ] and [ → ] are used to indicate left and right
diamond keys.
Top and Bottom
Diamond Keys These keys are used primarily to change configuration data (numbers). At times,
they are also used to move from one section to another.
Note: Throughout this chapter, [
↑ ] and [ ↓ ] are used to indicate top and bottom
diamond keys.
The modem responds by beeping whenever a key is pressed:
• A single beep indicates a valid entry and the appropriate action was taken.
• A double beep indicates an invalid entry or a parameter is not available for
operation.